Ads Top

Install Xiaomi Redmi Note 6 Pro Stock Firmware Flash File

redmi note 6 pro firmware

Download Official Stock Rom Flash File For Xiaomi Redmi Note 6 pro. If you have got Xiaomi Redmi Note 6 pro Smartphone and you would like to download the Stock ROM /Flash File/For it then you're on a correct Place, you have to try and do this by following the Below Guide.

The Xiaomi Redmi Note 6 pro is a tablet that is Run on android 8.1 OS and powered by a QCOM Processor, the Xiaomi Redmi Note 6 pro is a dual sim tab that accept two Regular SIM card, connectivity Option’s include 3G 4G, GPS, Wi Fi, Bluetooth etc, sensor include Goryo proximity Gravity etc.

In Some cases we've got bricked our device, then we will bring back the phone (Unbrick) using the stock firmware anytime. also if you are feeling your Xiaomi Redmi Note 6 pro lag or has a difficulty, then flash the stock firmware from the list below and save from situation. Flashing of Stock firmware doesn’t void warranty of your Xiaomi Redmi Note 6 pro.

Method 1: Flash firmware from recovery

Xiaomi is among the few android OEMs that permits you to flash the firmware directly from the device itself.
  • Download the Redmi Note 6 pro firmware (recovery version) first.
  • Rename it to on your laptop. (Make sure there are not 2 .zip at the end of it.)
  • Transfer the download MIUI rom file to the interior storage of your device. don't place the file inside any folder or sub-folder on the device.
  • Reboot to recovery mode. For this, open the updater app, click the 3-dot button at the top right, and select ‘Reboot to recovery mode’ here. The device would reboot into recovery mode.
  • (Alternate method: power off the device, look forward to the screen to go black, then press and hold Volume up and Power buttons along till you see something on the screen.)
  • Select your language in recovery mode first. now choose ‘Install to System’. make sure it on nest screen by choosing yes. firmware can begin installing.
  • Once done, hit the back button, and so reboot button to restart the Redmi Note 6 pro.
That’s it.

Method 2: Flash firmware from laptop
If you’d wish to do things the previous method, here’s the second technique to flash MIUI rom on the Redmi Note 6 pro from your pc.

Things you will need:
  • Redmi Note 6 with OEM unlocking enabled and bootloader Unlocked. (Here’s how)
  • Download and install the Mi Flash Tool. (Download link given below)
  • Download the Redmi Note 6 pro firmware (Fastboot version) on your laptop. (link given below)
  • Make sure that the device has 80th battery charge.
Once you have got the rom file downloaded on your pc and the Mi Flash Tool installed, you’re able to start.

Shut down the device and put into Fastboot Mode by pressing and holding down the power + Volume Down button till it vibrates.
  • Once the device is in Fastboot Mode, connect it to the pc via a USB cable.
  • Extract the firmware file .zip on your Windows laptop.
  • Copy the path of the MIUI rom file that you just have downloaded.
  • Open the Mi Flash Tool and paste the file path in the address bar of the program.
  • Press the Refresh button first and then click on Flash button to start the process.
The process can take some minutes to complete, upon that the device are going to be updated to the new software and reboot.

You may also like:

Must Read:- 


No comments:

Powered by Blogger.